Optional Cables and Cable KitsCarNetix is pleased to provide one-of-a-kind custom power cable kits for for today's most popular car computers including the Mac mini (MacPac), AOpen Pandora (AOPac), and Xenarc MP-SC3 & SC8 (CNX-CA-SC3 and SC8). These cable kits save you the time and hassle of searching for the right connector, or cutting the connector from your AC adapter. CarNetix is proud to be the exclusive proivder of automotive solutions using the proprietary DC power interface to the Mac mini.
Mac mini Cables
"MacPac" POWER CABLE KIT
A "plug and play" power cable kit for your Mac mini! No more cable splicing!!
Carnetix is pleased to announce the only
"plug-and-play" power cable solution
for the Apple Mac mini and your CarComputer
application! The "MacPac" power
cable kit connects your mini to the CNX-CA-P1900
DC-DC regulator to provide a quick and simple
automotive installation. You are no longer
required to cut and splice your Apple AC
adapter (brick). The MacPac provides a pre-wired
cable between the P1900 and the Mac mini,
and includes all power and control signals
necessary for full automatic startup and
shutdown of the mini. The MacPac is fully
compatible with the original Mac mini as
well as the new Intel-based mini. (Note:
Users of the CNX-P1900 V2.0 regulator and
Intel-based mini will need to add a "resistor
mod" to their P1900. Please check HERE for the P1900 V2.0 resistor mod).
"AOPac" Power Cable Kit
Plug and play power cable kit for your AOpen Pandora and the P1900 or P2140
Carnetix is pleased to announce the only "plug-and-play" power cable solution for the AOpen Pandora and your CarComputer application! The "AOPac" power cable kit connects your PC to the CNX-CA-P1900 or CNX-P2140 DC-DC regulator to provide a quick and simple automotive installation. You are no longer required to cut and splice your AC adapter cable to get the power connector. The AOPac provides a pre-wired cable between the P1900/P2140 and the AOpen Pandora, and includes all power and control signals necessary for full automatic startup and shutdown of the PC.
The AOPac kit includes all of the components of the original AOPBK (shown below), as well as a DC power cable with appropriate barrel connector to plug directly into your AOpen. As with the AOPBK, the Y-cable adapter is installed between the PC's power button and the motherboard, permitting continued use of the AOpen's power button. The AOPac allows you to easily remove the PCfrom the car so that you can take the mini inside for software tweaking or updates. When indoors simply use the AC adapter that came with your PC.
The AOPac also provides access to the P1900/P2140 secondary output, DelayOn amp control, and ground via seperate wires.
The AOPac is availble now throught selected resellers.
AOpen Power Button Cable Kit
The kit is
designed to provide a plug-and-play (ie no
soldering) connection to the AOpen power
button which can be exteneded outside of
the AOpen chassis and connected to the ACPI
output of the P1900. This cable will simplify,
and make more reliable the AOpen/P1900 installation.
Xenarc MP-SC8 Power Cable KitThis power cable kit provides a "plug-and-play" cabling solution for either the P1900 or P2140 and a Xenarc MP-SC8. No soldering is required. The kit includes both the power cable and ACPI cable for the Xenarc MP-SC8 with rear-panel access to the PC power button. Double check your PC to make sure it has this ACPI interface.
CarNetix Part Number: CNX-CA-SC8
Xenarc MP-SC3 Power Cable KitThis power cable kit provides a "plug-and-play" cabling solution for either the P1290 and a Xenarc MP-SC3. No soldering is required. The kit includes both the power cable and ACPI cable for the Xenarc MP-SC3 with rear-panel access to the PC power button. Double check your PC to make sure it has this ACPI interface.
CarNetix Part Number: CNX-CA-SC3
Sumicomm/Xenarc/Commell/IWill Case Power Cable
Used with: CNX-P1900 or P2140 when connecting to Sumicomm
S620, Xenarc SC8, or Iwill ZPC, or to the
rear-panel power connection of the Commell
This cable fits the rear-panel power connection
on P4 PCs from Simicomm (S620), Xenarc (SC8),
Iwill (ZPC), as well as the Commell LV671motherboard.
Screen Power CableUsed with: Lilliput or Xenarc 7" LCD screen
CarNetix Part Number: CNX-CA-LCD
The screen power cable is a high quality power cable that is compatible with any LCD screen whose power connection consists of a 2.1mm x 5.5mm barrel connector. The wire is 18GA and is 6' (1.8M) long.
Copyright 2004 CarNetix